Impossible Objects founder Bob Swartz: “We survived introducing a new technology. Our perseverance made that work.”
Originally published in TCT Magazine | by Sam Davies
Swartz, and CEO Steve Hoover, talk to TCT after Impossible Objects’ $40m Series B financing round.
The cost of innovation is more than money, and more than time.
It requires, as the cliché goes, blood, sweat, and tears. But for an engineering mind, there can be littlemore rewarding than coming out the other side with a product able to be commercialised, able to bescaled, and able to attract the business of manufacturers across a range of industries.
Several teams of people working in what we now consider the additive manufacturing (AM) sectorachieved this feat 30-40 years ago, laying the groundwork for generations of fellow entrepreneurs andinnovators to add their touches to seven core categories of AM technology, as classified by ASTMInternational.
Most emerging AM products in recent years have largely conformed to these seven processes, withmost differentiating themselves with, for example, an altered form factor, productivity level, ortemperature capability. It has made the initial establishment of such offerings much easier but, arguably,the ability to sustain momentum in the long term that much harder.
This, in part, is what prompts Impossible Objects founder Bob Swartz to describe the AM industry’spenchant for incremental change versus truly disruptive transformations as ‘baffling.’ Founded some 15years ago, Impossible Objects has developed Composite-Based Additive Manufacturing (CBAM)technology, a process that Swartz would consider enough of a deviation from one of the seven classesof AM processes to be considered an innovation.
While most akin to sheet lamination, a process suite that sees sheets or strips of material bonded usingadhesive or welding and later cut to shape with CNC or laser techniques, CBAM deposits aqueous fluidon sheets of carbon fibre or fibreglass, applies thermoplastic powder, heats and compresses the sheetsto the polymer’s melting point, and sandblasts away the unbound material.
Different enough, Swartz would argue, to be considered something other than sheet lamination, butsimilar enough, history would tell us, to make the commercialisation of the process challenging. Andchallenging enough to make even Swartz concede that if he knew 15 years ago how long it would taketo get even to where the company is today, he may never have embarked on the journey.
But he did. Because of a belief that disruption was needed. And a belief that additive manufacturingcould – and in his mind would – bring about that disruption.
Having been involved with his father’s vertically integrated advertising display manufacturing businessearlier in his career, Swartz became very familiar with injection moulding, vacuum forming, the assemblyline, and other technologies that have established a standard for how components are produced. Thesetechnologies were once disruptive in their own right, but as time has gone on, the limitations – whether itbe long lead times for tooling or the concessions made in design – have become a source of frustrationfor many, including Swartz.
“The big change that occurred in the 19 century was interchangeable parts and mass production,” hetells TCT. “And we’ve been trapped in this loop. Additive manufacturing and digital fabricationtechnologies have the potential to change all that. And I got into this business because I saw that if youdidn’t have all these restrictions, that would be as fundamental a change as the early mass productionthings, where no longer does everything have to be the same. Everything can be different.”
Swartz has been inspired by the architecture found in cities like Rome, where much of its building stockdates back hundreds of years. Back then, there were no standards for how to build and no globaliseddesign firms with their common practices. Today, there are, and the combination of trusted designs andmaterials replaces idiosyncrasy with uniformity.
The result is often parts you can trust and parts made in the most economical way, but not always partsthat inspire and not always designed to achieve the best performance.
“We live our lives through things, and we’re changing the way things are made,” Swartz continues. “Thatrevolution that we’re seeing in these technologies [makes] 3D printing as important as the computer,because the manufacturing of things is fundamental to our daily lives.”
In addition to the computer, Scwartz recently remarked that 3D printing is as important as the mill,precision measurement, and interchangeable parts in what it could do for how parts are made.
They are the kind of comments we used to hear all the time. Before the industry was aware of the hype itwas creating and before it was humbled by the subsequent ramifications when it did not immediatelyjustify the fanfare. It has made the sector almost allergic to this kind of rhetoric and encouraged peopleand organisations alike to talk with more restraint. Collectively, the sector would rather undersell thanoverpromise.
The recent messaging from Impossible Objects is somewhat of a departure from this train of thought,though it is not hard to see why the company is willing to portray such confidence. In recent years, theadditive manufacturing industry has experienced a boom of interest from sectors like defence, withCONTEXT reporting that the Industrial class of AM machines (those costing more than $100,000, likeImpossible Objects’ CBAM solutions) have seen an 18% increase in Q1 2026 and a 25% year-on-yearincrease in shipments in Q2 2026.
This trend has not evaded Impossible Objects. Demand for benchmark parts has always been high –sometimes a little too high – but Impossible Objects is now turning this curiosity in CBAM into machinedeployments. Five CBAM 25 machines have been ordered, with three of them so far installed, andCBAM has also been included in the US Air Force Technology Roadmap.
Per Impossible Objects, the fast speeds of CBAM – its machines are capable of running at 25 feet perminute – and its composite material sets have resonated with those in the business of manufacturingdrones. The company has secured $20 million in US government contracts and awards, with workthrough Small Business Innovation Research (SBIR) Phase I and Phase II awards supporting thedevelopment of high-strength long-range drones, some of which feature integrated wiring insideadditively manufactured parts. At US Army Rock Island Arsenal, Impossible Objects says it is capable ofsupporting the production of up to 10,000 drone bodies per month.
Its play in drone applications takes one of two forms. Either the company is supporting the developmentof new drone designs that ‘uniquely leverage CBAM technology or it is operating as a prime. In oneprogram, Impossible Objects is manufacturing a series of large drone components that are laterassembled into a UAV that weighs less than two pounds.
The company’s service to the defence space doesn’t end there. It has brought Impossible Objects into apartnership with Titan Dynamics, while it is also deploying CBAM 25 systems at the facilities of the USAir Force, the National Institute for Aviation Research, the Oregon Manufacturing Innovation Center andRochester Institute of Technology. The inclusion of the technology on the US Air Force’s TechnologyRoadmap, and the rising demand for AM in defence, suggests more deployments of this type can beexpected.
This is where Impossible Objects’ confidence comes from.
“It gives a tremendous amount of credibility,” CEO Steve Hoover says. “This is a technology that the AirForce has selected and sees as a wave of the future. A lot of these early contracts are R&D contractswhere we worked with the military to speed up certain aspects of our process, to develop new materials,to explore things like, ‘Could I embed wiring inside of my parts?’ So, these are creating new capabilities,which then the Air Force validates and says, ‘That is a capability that A) is real and B) is valuable.’”
Beyond defence, Impossible Objects is also said to be gaining traction in tooling, electronics, andfixturing applications, with CBAM able to present itself as a more cost-effective option than CNCmachining for volumes between 1 to 10,000, especially for machined aluminium and machined plastic,according to the company.
Now, Impossible Objects is faced with its next challenge: scaling to meet demand. While Swartz admitsyou can never truly prepare for such a rise in demand, he believes it’s easier than doing what hasalready been done.
“Inventing a new technology and perfecting it is extremely difficult to do,” Swartz says. “Scaling upcompanies is one that’s better understood. It is easier than inventing a whole new technology. And sothat gives us confidence despite the wall that we have to scale. There’s a way that we can accomplish it.Those are problems which people know how to solve, whereas the other ones, you’ve got to be luckyand make good guesses.”
Some of the ‘guesses’ that Impossible Objects has made in the past include its focus on PEEK. Thecompany spent ‘an enormous amount of time perfecting it’ and ‘had very significant problems doing it’,with, at least at the point at which R&D commenced, little guarantee that there would be a market for it.
Now, the rising demand of interest, coupled with several government contracts and machinedeployments, suggests that CBAM technology may be finding its place, but it has also onboardedseveral team members who have experience of operating within scaled businesses. Hoover, as oneexample, spent most of his career before Impossible Objects at Xerox, while its Chief CommercialOfficer Jeff DeGrange worked at Stratasys for a decade.
The company had also made enough progress by 2026 to proceed with a Series B round of financing.Around $40 million was raised, with the likes of Inflection Equity, Aaron Wealth Management, OCAVentures, Impact Capital and Excell Partners all buying into the company.
These funds are to be allocated for the manufacture and distribution of more machines, as well as tobolster its marketing, sales, and application engineering capacity. In-field service support is also to be abig consideration, with the company currently exploring how best to establish this offering, and not rulingout models adopted by the likes of Amazon and Dell, who have outsourced their support services to thirdparties in the past. And the company, keen to keep pushing the envelope, will invest a chunk into itsR&D operations.
Impossible Objects sees itself as a materials science company and is continuing to work on commoditymaterials – like PET, polyester and polypropylene – as well as recycled materials for both its substratesand polymers. Thermosets are another area of interest, as is powder manufacturing. One ongoingproject relates to using unidirectional materials which provide significant improvements in tensilestrength.
“That’s not a complete list,” Swartz says, “but it’s a starting point. There’s a bunch of other stuff I don’twant to talk about, but we’ve been an R&D company for a long time and still are. There’s an enormousamount of energy and time being spent on these things.
“Some stuff is obvious. Reduced cost is better, higher-speed post-processing and printing is better, morematerials are better,” he continues. “And some are still bets. We’re looking at materials that aren’tequivalent to PEEK, but we think in, for example, the drone market, if we can come close to our tensilestrengths and the bend strength of what we’re doing, that the temperature performance and the chemicalresistance of PEEK are less important. And if we can cut cost in half, there should be customerdemand.”
The Series B funding round is set to bring about a lot of change at Impossible Objects. New hires andnew strands to its offering are expected, as are new capabilities and new material sets. In the near term,there will be greater internal capacity to allow the company to produce trial parts and engage moredeeply in application development. But what will not change is the company’s appetite for guessing,betting, and innovating.
Swartz takes many things from the history of manufacturing. He notes the impact, for example, that theassembly line had on how things were made. He can see now the limitations of such previouslydisruptive innovations. And he keeps in mind the apocryphal Henry Ford quote that if he had asked hiscustomers what they wanted they’d have asked for faster horses.
Market research, he says, is not always valuable in an environment like additive manufacturing, but whathas proved to be so far is a persistence, a tenacity, and a determination to innovate.
“Pretty much anyone who tried a new 3D printing technology failed, and we’re one of the few companiesthat survived going through the process of introducing a new technology,” Swartz finishes. “It’s ourperseverance that made that work.”